Description
Eclipse — Hybrid Car Polish with Carnauba
Product overview
– Eclipse is an advanced hybrid polish blending high‑grade synthetic polishing agents with a rich concentration of natural waxes, including Carnauba. The formulation is engineered to deliver a deep, high‑gloss finish that resists light detergents and everyday contaminants while providing durable protection and enhanced surface clarity.
Key benefits
– Superior gloss: Carnauba‑enriched waxes deliver warm, deep reflection and visual depth.
– Hybrid durability: Synthetic components increase longevity and resistance to light washing and detergents compared with traditional wax‑only products.
– Paint conditioning: Helps refine light surface imperfections and improves the tactile smoothness of the clear coat.
– Efficient coverage: Concentrated formula requires only light application for effective results.
Recommended conditions
– Work in a shaded, dust‑free area with panels cool to the touch. Avoid application in direct sunlight or on hot surfaces to prevent rapid drying and uneven leveling.
Surface preparation
– Thoroughly wash and decontaminate the paintwork (including claying if necessary). If polishing to remove deeper defects, complete any machine polishing and wipe the surface with an isopropyl alcohol panel wipe to ensure an oil‑free substrate before applying Eclipse.
Application directions
1. Sectioning: Work one panel at a time to ensure even coverage and consistent leveling.
2. Applicator: Use a soft foam or microfiber applicator pad for manual application.
3. Application technique: Apply a small amount of Eclipse to the applicator and spread over the panel using light, overlapping back‑and‑forth motions to achieve an even, thin film. Less product provides superior results — avoid heavy application.
4. Dwell/level: Allow the product a short moment to level on the surface (time will vary with temperature).
5. Removal: Remove any excess residue using a clean, low‑pile microfiber towel, flipping to a fresh side as needed to reveal a high‑gloss finish.
6. Recoating: If additional protection or gloss depth is desired, apply a second light coat following the same procedure once the first coat has been fully leveled and buffed.
Usage tips
– Use minimal product and light pressure; over‑application will make buffing more difficult and reduce finish uniformity.
– For larger defects, perform corrective polishing first; Eclipse is formulated primarily as a finishing polish and protection step.
– Test on an inconspicuous area if the vehicle has recent coatings or specialty finishes.
Compatibility and precautions
– Compatible with most factory and aftermarket clear coats; when in doubt, patch test.
– Avoid application on rubber seals or textured plastics unless specifically intended.
– Keep out of reach of children and follow label and Safety Data Sheet instructions for safe handling.
Storage
– Store upright in a cool, dry place away from direct sunlight and extreme temperatures to preserve product performance.
