Description
Gamma Premium Waxes with Ceramic Polymers
Gamma’s advanced formulation blends high-grade natural and synthetic waxes with engineered ceramic polymers to deliver a durable, glossy hydrophobic barrier. The hybrid chemistry produces pronounced water beading and accelerated runoff behavior, offering superior surface repellency and protection against light contaminants, water spotting and environmental fallout. Performance testing indicates sustained hydrophobicity and gloss retention for up to six months under normal use conditions. In effect, Gamma’s wax system performs as a waxes answer to a ceramic coating—combining the depth, shine and ease-of-application of a premium wax with many of the water‑shedding and protective benefits associated with ceramic treatments.
Key benefits
– High‑gloss finish with deep wet-look shine
– Strong hydrophobicity: exceptional water beading and rapid runoff
– Enhanced surface protection versus traditional waxes
– Lasting performance — up to 6 months under typical conditions
– User-friendly application and maintenance
Directions for Use
Surface preparation
1. Thoroughly wash the vehicle and ensure the paint is fully decontaminated. Use a clay bar or equivalent decontamination method to remove embedded contaminants before applying Gamma. Proper prep is essential for optimal adhesion, gloss and durability.
Application
1. For foam applicators: lightly load the pad by inserting the applicator into the wax pot and twisting by approximately one quarter turn to coat the pad surface.
2. Work one small panel at a time using small, even, overlapping strokes. Apply a thin, uniform layer — Gamma is highly concentrated; a little goes a long way.
3. Once a panel is evenly coated, proceed to the adjacent panel and apply Gamma so the original panel can begin its cure. Return to the first panel and buff once the product has set. Continue this rotational panel‑by‑panel workflow until the entire vehicle is complete.
Troubleshooting and additional coats
– Avoid over‑application or allowing the product to cure excessively on the surface; prolonged curing can create a secondary haze or stubborn residue that is difficult to remove. If haze occurs, use Comet Quick Detailer to aid removal.
– If a second coat is desired for added durability, wait 3–4 hours after the initial application before applying the subsequent coat.
Environmental and temperature guidelines
– Do not apply Gamma in direct sunlight or on hot panels. Recommended ambient temperature range for application is 5° C to 25° C. Temperatures outside this range can compromise proper curing, leading to suboptimal film formation or reduced longevity.
Storage and safety
– Store in a cool, dry place away from direct sunlight. Follow all standard product safety instructions and use appropriate PPE where required.
