Description
Beta — High‑Gloss show Wax
Product description
– Beta is a premium wax blend formulated for effortless application and buffing, delivering a deep, high‑gloss finish that lasts up to one month under normal conditions.
– The formula is highly efficient; minimal product delivers excellent coverage and shine.
Directions for use
1. Surface preparation: Ensure the paintwork is fully decontaminated prior to application. Perform a clay bar treatment to remove embedded contaminants, then wash and dry the vehicle.
2. Applicator preparation: If using a foam applicator, lightly coat the applicator by twisting it into the wax pot by a partial turn so the surface is evenly covered.
3. Application technique: Apply Beta using small, even, overlapping strokes. Use a light touch — a little product goes a long way. Work one panel at a time. After fully covering a panel, begin the next panel and allow the initial application to set while you work; return to the previous panel and buff before proceeding. Continue this panel‑by‑panel rotation until the entire vehicle is treated.
4. Buffing: Buff off the residue with a clean, soft microfiber towel to reveal the high‑gloss finish. If residue becomes difficult to remove (secondary haze), use Comet Quick Detailer to assist removal.
5. Recoating: If desired, a second coat may be applied after 3–4 hours from the initial application.
Temperature and environmental limits
– Do not apply Beta at ambient temperatures above 25°C or below 5°C, as extreme temperatures may cause improper curing (over‑curing or under‑curing) and affect performance.
Warnings and tips
– Avoid over‑application; excessive product or allowing the wax to cure for too long will increase buffing difficulty.
– Test on an inconspicuous area if unsure of compatibility with aftermarket coatings.
– Store product according to the label and keep out of reach of children.
