Description
Mantle — Ceramic‑Infused Ultra‑Hydrophobic Quick Detailer
Product overview
Mantle is a fast‑action quick detailer formulated with high‑performance ceramic polymers to deliver an immediate, ultra‑hydrophobic surface finish. The ceramic infusion forms a thin, low‑surface‑energy network on paint and coated substrates that increases water contact angles, promotes aggressive beading and rapid runoff, and enhances gloss and surface clarity. Mantle is engineered for ease of use: it applies and buffs off cleanly, provides visible wet‑look depth, and delivers durable maintenance protection for up to three months when applied to a properly prepared surface.
Performance highlights
– Ceramic polymer technology: deposits a silica‑based film that bonds at a micro level to provide measurable hydrophobicity and abrasion resistance beyond conventional spray detailers
– High contact angles and rapid beading: reduces water dwell time, minimises spotting risk and improves self‑cleaning action during light rainfall or wash cycles
– Gloss enhancement: increases surface reflectivity and perceived depth for a wet, showroom finish
– Maintenance or stand‑alone use: effective as a quick top‑up over existing sealants/coatings or as short‑term standalone protection
– Up to 3 months of residual protection (dependent on substrate, environmental exposure and maintenance frequency)
Recommended application procedure
1. Surface condition: Use only on clean, dry paint surfaces. Ensure the surface is free of contaminants, dust and oils for optimal bonding and durability.
2. Application: Work one panel at a time. Apply a small, even amount of Mantle to a clean, high‑quality microfibre applicator or cloth.
3. Spread and buff: Evenly distribute the product across the panel, then immediately buff to a high gloss using a fresh, clean microfibre cloth to remove residues and refine the finish.
4. Overcoating: If topping an existing ceramic coating or sealant, ensure compatibility by testing in an inconspicuous area.
Usage notes and precautions
– Do not apply on wet, dirty or contaminated surfaces. Surface preparation directly influences longevity and hydrophobic performance.
– Avoid application in direct sunlight or on hot panels to prevent uneven curing or streaking.
– For maximum durability, apply Mantle after a full decontamination and, if desired, follow with a dedicated maintenance coat according to coating manufacturer recommendations.
– Performance may vary with environmental conditions and vehicle use; reapply as needed to maintain hydrophobic performance.
Storage and safety
– Store in a cool, dry location away from direct sunlight. Keep container tightly closed when not in use. Follow standard handling precautions and refer to the Safety Data Sheet for detailed safety information.
