Description
Let It Rain — Premium Polymer Wax Additive (Hydrophobic Rinse‑Aid)
Product overview
Let It Rain is a concentrated polymer wax additive formulated to deposit an ultra‑thin, invisible hydrophobic film during the rinse stage of a wash. The polymer matrix lowers surface energy across painted and coated substrates, producing immediate water beading and accelerated runoff that reduces water dwell time and significantly shortens drying. The transparent polymer layer also provides a sacrificial barrier that helps repel light contaminants, road film and mineral spotting between full detailing services.
Performance benefits
– Instant hydrophobic response: rapid beading and runoff that assists water removal and reduces spotting risk
– Drying time reduction: promotes quicker, streak‑free drying when used as directed
– Protective sacrificial layer: impedes adhesion of light contaminants and helps maintain surface gloss between waxes/coatings
– Clear, non‑film forming finish: designed to rinse cleanly without altering color, gloss or feel when applied correctly
– Compatible as a maintenance additive with most paint sealants, waxes and ceramic coatings (test for compatibility with specialty coatings if uncertain)
Application instructions
Important: Apply only to a freshly washed, rinsed and still‑wet vehicle. Do not use on warm panels, in direct sunlight, or when surfaces are hot.
1. Preparation: Complete the wash cycle and ensure all shampoo and cleaner residues have been thoroughly rinsed from the vehicle. Work in shaded, cool conditions when possible.
2. Application: With the vehicle wet, apply Let It Rain as a light, even mist across each panel while rinsing. Aim for uniform coverage without pooling. A fine spray ensures an even polymer distribution.
3. Rinse: Immediately rinse the treated area thoroughly to remove any excess product — the formulation is designed to leave a thin polymer film after rinsing, not a residue.
4. Drying: Dry the vehicle promptly using a clean microfibre drying towel or blower. Do not allow the product to air‑dry on the surface.
5. Avoidance of streaking: Prevent streaking by ensuring complete rinsing and immediate drying. Never permit Let It Rain to dry on the paint.
Cautions and limitations
– Temperature and surface condition: Do not apply in ambient or panel temperatures above recommended comfort levels (avoid hot panels and direct sun). High temperatures increase evaporation and risk of streaking or uneven film formation.
– Compatibility: While broadly compatible with common sealants and coatings, perform a small patch test when used over recently applied specialist ceramic coatings or unconventional surface treatments.
– Not a substitute for full protection: Let It Rain is a maintenance additive intended to supplement existing protection (waxes, sealants, ceramic coatings), not replace a properly applied long‑term coating.
Storage and safety
– Store upright in a cool, dry place away from direct sunlight and heat sources. Keep container tightly closed when not in use.
– Follow standard chemical handling precautions. Avoid contact with eyes; in case of contact, rinse thoroughly with water and seek medical attention if irritation persists. Keep out of reach of children.
